Package: create-network-tshoot-livecd
Version: 1.1.2-1
Architecture: all
Maintainer: Ciro Iriarte <ciro.iriarte+software@gmail.com>
Installed-Size: 68
Depends: live-build, debootstrap, xorriso, curl, gpg, ca-certificates
Filename: all/create-network-tshoot-livecd_1.1.2-1_all.deb
Size: 23012
MD5sum: 70fae77f6b14e020fef597bd93fe133b
SHA1: bf2773cf3a93ea6e89ea5b1e482055cb59784591
SHA256: d06991b6252c59fd71f309640bfa1fdc3fd6e061191ff3fd7a5a88d25bd0a625
Section: net
Priority: optional
Homepage: https://github.com/ciroiriarte/obs-network-tools
Description: Build a boot-only network cabling-diagnostics LiveCD
 Builds a distro-independent live ISO (via live-build) that boots a target
 host into a RAM-resident diagnostic environment. On boot it identifies the
 host from a CSV persona inventory, brings up every physical NIC, runs
 nic-xray and lldpd, and prints a per-NIC cabling / LLDP-neighbour report to
 the VGA console and an auto-discovered serial console, then drops to a root
 shell. It writes nothing to local disks.
 .
 Requires a Debian or Ubuntu build host with live-build. On Ubuntu, install
 the live-build package from this same repository, as the distribution's
 stock live-build is too old to build a current image.

Package: live-build
Version: 1:20250505+deb13u1+nt1
Architecture: all
Maintainer: Debian Live <debian-live@lists.debian.org>
Installed-Size: 729
Depends: cpio, debootstrap
Recommends: apt-utils, bzip2, cryptsetup, file, live-boot-doc, live-config-doc, live-manual-html | live-manual, rsync, systemd-container, wget, xz-utils
Suggests: e2fsprogs, eatmydata, git, mtd-utils, parted
Filename: all/live-build_20250505+deb13u1+nt1_all.deb
Size: 156784
MD5sum: 7c6f623ab9d40ebc716f3d72a28937e1
SHA1: e5c66e2e7217e5ebe4d318a7b7d436dc9d74e737
SHA256: 89b7f8f5d33d0e407f5f9021eb7e5173ce83c6324f81132de6edd4d68f2d6f69
Section: misc
Priority: optional
Homepage: https://wiki.debian.org/DebianLive
Description: Live System Build Components
 The Debian Live project maintains the components to build Debian based Live
 systems and the official Debian Live images themselves.
 .
 live-build contains the components to build a live system from a configuration
 directory.

Package: nic-xray
Version: 2.10.2-1
Architecture: all
Maintainer: Ciro Iriarte <ciro.iriarte+software@gmail.com>
Installed-Size: 134
Depends: ethtool, lldpd, iproute2
Recommends: graphviz
Filename: all/nic-xray_2.10.2-1_all.deb
Size: 35248
MD5sum: 70a582532f325a631aab228b30da9727
SHA1: 03636b9caf82b49af9ce7304ca4994723855fd43
SHA256: 93197164f1b7d676d52a94dc5fee9ee9c89e48eea0ecc47d509f6e9d5abe2eb8
Section: net
Priority: optional
Homepage: https://github.com/ciroiriarte/nic-xray
Description: Ethernet physical connectivity diagnostic tool
 Displays detailed information about physical network interfaces including
 PCI slot, firmware versions, MAC, MTU, link status, speed/duplex,
 bond/LAG membership, and LLDP peer information.

Package: switch-xray
Version: 1.0.1-1
Architecture: all
Maintainer: Ciro Iriarte <ciro.iriarte+software@gmail.com>
Installed-Size: 83
Depends: snmp
Recommends: graphviz
Filename: all/switch-xray_1.0.1-1_all.deb
Size: 19408
MD5sum: 35f068a46c03428cdd2108e8b670dd30
SHA1: 4760e65f3a1cb1470f307e72481d2b2a9597ce7b
SHA256: c0edb7dccfc2480d464b0f4907566ecf30eeaa67b89391e51180e77d26c4c676
Section: net
Priority: optional
Homepage: https://github.com/ciroiriarte/switch-xray
Description: Switch port diagnostics and documentation via SNMP
 Queries network switches via SNMP to display port status, neighbor
 information, VLAN assignments, and optionally generate topology diagrams.
 Supports automatic switch discovery and documentation workflows.